Sunlu S2 - Caribou Frame Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sunlu S2 Filament Dryer mount on top of Caribou Printer
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 2968
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for Sunlu S2 Filament Dryer on top of my Caribou Duet 420.
It will be mounted with 3 screws at the frame.
Regarding the print orientation, I ve selected like an orientation like in the attached picture, but you can choose depending on your support settings.
As a Material, for me the best option was ASA. PETG will handle it as well but i would not go for PLA.
The position on top of the frame is technically not the best solution, due its weight way above the center of mass but it is a practical solution, which works fine.
Happy printing :)