Spool-hole Dessicant Container-Shorter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix based on Ron Harding's dessicant container, with reduced height, for less wide spools.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Thanks to @Ron Harding for patiently explaining to me how to modify models in Prusa Slicer.
I printed a ton of Ron Harding's dessicant containers, but they had 2 issues. They were too tall for my less wide spools. and the caps were pointy, and damaged the ziplock bags I was using for storage. I have tried to fix both issues in this remix.
Each of the bars in the container is 3mm. I have made a bunch of STLs for different container heights. Ron's original container is 72mm tall. Mine start at shorter by 9mm (ie 63mm), and go down by increments of 3mm.
This model prints better at lower temperatures. No supports needed.
Update: I am adding a screw on funnel to make it easier to pour dessicant into these guys. The funnel part is supposed to be printed with a reasonable number of perimeters (say 4-6), 0% infill, and no top or bottom layers.