1 / 1
SHANTY SHED UNDER CONSTRUCTION HO (1/87th) SCALE — zdjęcie 1

SHANTY SHED UNDER CONSTRUCTION HO (1/87th) SCALE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

You don't see many buildings on model train layouts that are under construction.

Ocena
5 / 5
Polubienia
44
Pobrania
218
Wydruki
1
Wyświetlenia
569
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

This HO scale (1/87th) SHANTY SHED is under construction. Depending on your printer, some components may require some minimum minor trimming. I exclusively print with PLA and have found that ordinary clear lacquer thinner (Nail polish remover) is a wonderful glue. Make a small test for yourself of two pieces of printed scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on stryene and PLA for years. No sloppy or messy glue to show when finished.

If you would like me to design a custom model for you contact me at:

[email protected]. 

Tagi