Elegoo Relay Board Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly smaller version of my Relay Board Case. This time for the Elegoo Relay Board.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey there and welcome to this design!
Why I made this design?
Well, I made a version to fit the Relay Board of AZ-Delivery and got a few more for some projects, but this time from Elegoo. Their Relay Board is slightly smaller than the ones of AZ-Delivery, so I modified my original design to make it fit.
You should not need any threaded inserts or nuts, it should fit tight enough by screwing in the M3 screws.
Security advice:
Be sure to not touch or have any metal contact with the soldering pins underneath the Relay Board! Once you wired it up to your power socket, depending on your region, there will be 110V or 230V of current going through! So be careful, please!
What else is needed?
four M3x10mm screws
two 3.5x12mm wood scews (or anything you like)
Printing settings:
- Printer: Creality Ender 3 S1
- Rafts: No
- Supports: No
- Resolution: 0.2mm (or 0.24mm)
- Infill: 30% (can be less or more)
- Filament: Prusament PETG