Spare 20mm Glass Fuse Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box that holds 8 20mm long glass fuses.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 724
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I have a lot of holiday inflatables. I keep a box of spare parts, lightbulbs, fuses, etc. I realized all of my spare fuses were just rolling around in the bottom of the box, waiting to break or get lost. I went looking online for a spare fuse holding box to keep things neat, and I didn't really find anything that would work.
So I designed my own :)
This “Match Box” style box will hold 8, 20mm fuses in individual compartments. The fit is sung, to keep the fuses from rattling around and falling out. If you flip the fuse holder over, there are holes in the bottom. You can gently poke something through to pop a snugly held fuse out of the holder.
Print Notes
Print the holder flat on it's back
Print the cover with one of the open ends face down on the print bed, it prints like a tube :)
The one I printed in the photos was printed with Prusament PETG Carmine Red. 0.4mm nozzle, .2mm layer heights. 15% infill.
It takes a little under 2 hours to print.
Model Notes
I've included the Fusion360 file for this model. It's parametrically driven. NumberOfFuses is the value you'll want to change if you want a box with more compartments. Or less compartments.