Land Rover Discovery II center console switch bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inner bracket for window control switches on 2003 and compatible Land Rover Disco II.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 414
- Wydruki
- 1
- Wyświetlenia
- 1647
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is the inner bracket for the switches in the center console with four window switches, two heated seat buttons, and a rear window lockout button.
The outer trim panel has already been created by Hyta and can be found here: https://www.printables.com/model/58473-land-rover-discovery-2-window-switch-cover
Hyta provides trim panels for vehicles with fewer switches in this panel, however my base model Disco had them all. I suspect that this inner bracket could be used with some switches left empty and the proper cover plate to hide the holes, but I have not confirmed that.
This part is directly modeled from the original component and is not ideal for FDM, but I had success printing in PETG with the flatter side down and using supports.