1 / 2
Cardboard Spool Rim Only - Remix for Inland ABS and PETG Cardboard Spools — zdjęcie 1
1 / 2

Cardboard Spool Rim Only - Remix for Inland ABS and PETG Cardboard Spools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the cardboard spool rim only for Inland ABS and PETG cardboard spools.

Ocena
5 / 5
Polubienia
29
Pobrania
205
Wydruki
2
Wyświetlenia
1316
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Edge rim only for cardboard spools. This is a quick remix to fit for the Inland ABS and PETG cardboard spools.

I recommend printing in PETG. It is strong and flexible for this installation. I'm not certain PLA would work without breaking when trying to install. If you print the rings with ABS, shrinkage may require scaling in X and Y for fit. For my ABS test, 0.5% (1 mm) in X and Y resulted in the expected fit.

These rings print quickly, stay in place, and are effective at protecting the spool edges. The edge ring was sized in the design for a 0.2 mm layer height

For the Bambu Lab AMS they address the issue of dust and roller wear from the spool edges.

Tagi