VP3D Maker Fidget Coin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place maker fidget coin. The inner circle and outer ring move independently.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 191
- Wydruki
- 1
- Wyświetlenia
- 1793
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print in place maker fidget coin. The inner circle and outer ring move independently. Can be printed in a single color, but a couple filament swaps really show off the detail. Designed for Prusa's December Design Competition. This was my first contest entry of my design skills, and unbelievably I won! Thanks to all who voted for me!
Prints fine at .2 layer heights. It has a .3 gap between sections, and may require a little manipulation to break free. This was design to show off the tight tolerances, and ease of filament changes possible with the Prusa MK3 printer.
The last few layers of ridges on the top of the coin are a bit of a retraction torture test, so be ready.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial Category: 3D Printing Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: .2
Infill: 10
Filament: Multiple PLA Multiple