VESA Mount Adapter Plate for Monitor Speakers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate to mount a speaker onto a VESA monitor arm
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 1865
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a better way to mount my speakers, and to get them off of my desk and reclaim my desk space. I decided to mount them onto a dual-monitor arm so the speakers would flank my monitor and be able to be positioned better. The only issue was that I needed a way to adapt the speaker to attach securely to the VESA mount, so I designed this adapter plate.
This adapter plate uses a 75x75mm VESA pattern, however I have included the STEP file so you can easily adjust it to use the common 100x100mm (or any other) pattern.
What you will need for each adapter plate:
- 4x M5x12mm button head screws
- 4x M5 heat-set inserts
- 25mm 3M VHB tape
I highly recommend a soldering iron with temperature control for installing the heat-set inserts, such as a Pinecil.
I printed this in Carbon Fiber PETG with 5 perimeters for the heat-set inserts. PLA, ABS, ASA would also be fine.
Assembly is simple:
- Set your soldering iron to at or below the printing temperature of your material.
- Position the adapter plate on the edge of a table with the flat side UP
- Place the insert over the hole and gently push it through with the soldering iron. Repeat for all four holes
- Apply VHB tape. If you use 12mm screws, you can safely cover the holes with VHB as they will be flush with the plate
- Stick plate to the bottom of your speaker
- Attach to your VESA mount with the M5 Screws