Settlers of Catan Fit-In-Box Carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carrier and organizer for 3D printed Settlers of Catan set. Fits all tiles, cards, and dice inside of original game box.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 2285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
This design is a carrier/organizer for 3D printed Settlers of Catan sets. All tiles, cards, and dice and be fit inside of the original game box. This fits just the general base set. Unfortunately there is not space for the player pieces, but if anyone has suggestions on where they could fit I am open to making additions.
In order to print on an Ender 3 I had to print in six pieces and glue together with gap filling CA. The six divided files have the suffix (X-X). If you have a large enough print bed, files are also included to print in 3 pieces or whole. Fusion 360 files are also included if anyone would like to make modifications.
The card holder slots into the corner and the drawers are held in place by tab so they don't fall out. To play, we usually keep the cards in their respective trays which is nice and organized during gameplay. Because it can be a standalone part, the card holder files are uploaded separately and can be found here:
https://www.printables.com/model/320638-settlers-of-catan-card-holder
