1 / 5
Ugly but easy to print Creality housing with BL Touch — zdjęcie 1
1 / 5

Ugly but easy to print Creality housing with BL Touch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creality, Ender 3, CR20 etc hot end housing utilising stock fans with a mount for BL Touch. Ugly but easy to print.

Ocena
5 / 5
Polubienia
0
Pobrania
40
Wydruki
1
Wyświetlenia
310
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

EDIT: Now a version with M3 and M2 brass inserts is available. The one without inserts can crack when the screws are tightened. Inserts solve that issue.

I've been using Hero style housing on my CR20 Pro for two years to print ABS but need one of them to print PLA now and I'd thrown out the original housings, whilst the hero suck for printing. They are flimsy and need supports.

This housing allows for focused cooling of the little radiator. It's easy to assemble. Put the housing onto the carriage first. Then add the hot end. The fan guide goes on next and is held in place with the hot end fan with two M3 screws. Add the BL Touch on the one side and the part cooling fan on the other. Put the nozzle onto the fan first. Screws tap their own threads. Use M2x10 for the part cooling fan and M3x15 or so for the hot end fan. In hindsight I ought to have simply used the same for the BL Touch but here you need M3x(8 I think) with hex nuts.

No supports are needed. All parts are in the correct orientation for printing.

The BL Touch distances are 10mm on the Y and 42.5 on the X.

It's very light even though I printed it with 1.6mm walls, 1.6mm top and bottom skins and 40% lightning style infill.

Print in ABS. Use brim for better adhesion.

 

 

Tagi