Amazon Fire HD 10 (2021/11th Gen) Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for the Amazon Fire HD 10 (11th generation / 2021 model)
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 236
- Wydruki
- 1
- Wyświetlenia
- 2513
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall mount for the Amazon Fire HD 10 (11th generation / 2021 model) based on https://www.thingiverse.com/thing:4734399, with the following modifications:
- The side walls have been made thicker and a cavity has been added on the right-hand side to allow for more commonly available right-angle USB-C plugs (up to 12mm from the edge of the tablet body) to fit while still being covered by the frame.
- The back of the model has also been made thicker to allow for 5mm clearance between the back of the tablet and the wall.
- A camera cutout has also been added to allow for camera functionality in apps such as Fully Kiosk Browser
I printed the body at 0.3mm and the frame at 0.2mm, using AnyCubic white PLA. Generally, I use Cura to slice however it greys out a certain area of the print bed, meaning it refused to slice the frame parts despite them being within the size limit for my printer. Prusa Slicer has no such issue, so I ended up slicing the body parts in Cura and the frame in Prusa Slicer. This did not cause me any issues.
You may need to sand off some material at the point where the cable goes behind the tablet, depending on how flexible your cable is. This can be seen in the 4th photo.