1 / 5
Blink Mini Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a mount for my Blini Mini to be able to adjust it straight out.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 326
- Wydruki
- 4
- Wyświetlenia
- 1188
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 10)Remiksy (2)Kolekcje (67)Powiązane
Created the model in Fusion 360. 20% infill with no brim or supports. Takes just over 2 hours to print. Wanted a mount to raise the camera and used two Command strips on the back for easy removal with no mess. Added a slot on the back to allow the cable to run behind and allow the mount to stay flush.