Personal Apprentice replacement legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement leg for a toy robot my son was given as a present. Unfortunately both of the legs were broken in…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement leg for a toy robot my son was given as a present.
Unfortunately both of the legs were broken in the box when he opened it.
The original legs as I discovered were..... I'll be polite here, were let's just say they were a
little delicate!
There was almost no difference between left and right legs, so print one or two, it fits both sides.
The leg is in two parts to make it easier to print, just superglue them together as in the picture.
I guess there is only a slim chance that anyone in the world will need this.
The casing of the robot can easily be split down the middle, just be careful, the plastic is a little on the brittle side, the 3d printed leg is probably the toughest part.
0.8mm shell
0.1mm layer height
10% infill (it's hollow so probably not needed)
Category: Replacement Parts