1 / 4
Brother Scan N Cut CM300 Storage box with lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've added a slightly deeper box with different partition spacing to hold larger tools. This is a storage box designed…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
I've added a slightly deeper box with different partition spacing to hold larger tools.
This is a storage box designed to sit on top of a Brother Scan N Cut CM300 to store tools pens and cutting blades.
The one I made, is stuck with low tack double sided tape to the top of the machine.
The box will print without supports, however the lid will require supports for the lip around the edge.
I printed using PLA, 0.3mm layer height 20% infill
Category: Tool Holders & Boxes
