Behringer XR18 UTZ Rako Storage Box Insert Einsatz
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Behringer XR18 UTZ Rako Storage Box Insert Einsatz
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 1769
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This setup enables faster setup, everything is already connected inside the box.
I used a TP-Link MR200 Router to get a strong 5GHz WiFi connection with option to cellular internet.
The insert in the lid ensures that the device does not shift during transport. So the holder is a combination of the part in the base and the part in the lid.
Since some parts are larger than the print bed, I designed connections with 3mm dowel pins.
Material in the lid:
3x14mm dowel pins
M6 countersunk screw with stop nut
Material in the bottom:
3x30mm dowel pins
M6 cylinder head bolt with M6 nut and washer
All parts are fixed with small M3 countersunk screws through the box.
The whole combination is only possible if you have a cable with an angled C13 plug.
CAD Model: