Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Halterung für die Prusa MK3S+ Stahlbleche
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 99
- Wydruki
- 2
- Wyświetlenia
- 863
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Beschreibung:
Ich wollte eine Möglichkeit meine drei Stahlbleche (PEI, Satin, Pulver) in meinem Druckergehäuse aufbewahren.
In meiner Prusa Stahlblechhalterung befindet sich Platz für drei Stahlbleche. Das Spaltmaß für die Aufnahme der Bleche beträgt jeweils 1,5mm, Ursprünglich hatte ich 1,8mm (ist bei mir auch im Einsatz) aber damit haben die Druckbleche relativ viel Spiel und kippen leicht. Umfallen kann die Halterung nicht da ich zwei Aufnahmen zum befestigen mit 3,5mm Holzschrauben vorgesehen habe. Bei mit steht es auf stabil ohne die Schrauben.
Druckanweisungen:
Ich stelle zwei Versionen als 3mf mit meinen Druckeinstellungen zur Verfügung, die wie ich denke gut funktionieren. Gedruckt habe ich meine
Halterung in PLA mit 0,3 Schichthöhe, 20% Infill. Zusätzlich habe ich noch zwei Bildschirmprints vom Prusa Slicer angefügt.
Viel Spaß beim Drucken
Description:
I wanted a way to store my three steel sheets (PEI, Satin, Powder) in my printer enclosure.
There is room for three steel sheets in my Prusa steel sheet holder. The gap for holding the plates is 1.5mm each, Originally I had 1.8mm (is also in use with me) but with this the printing plates have relatively much play and tilt easily. The holder can not fall over because I have provided two receptacles for fastening with 3.5mm wood screws. With me it stands on stable without the screws.
Printing instructions:
I provide two versions as 3mf with my print settings, which I think work well. Printed mine
Bracket in PLA with 0.3 layer height, 20% infill. Additionally I have attached two screenprints from the Prusa slicer.
Happy printing