1 / 2
Möbelfuss für M10 Schraube / Furniture Feet for M10 Screw — zdjęcie 1
1 / 2

Möbelfuss für M10 Schraube / Furniture Feet for M10 Screw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ich brauchte ein Möbelfuss für M10 Schrauben. / I needed a furniture foot for M10 screws.

Ocena
5 / 5
Polubienia
24
Pobrania
192
Wydruki
3
Wyświetlenia
878
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

It fits a M10 screwhead very snugly, so no glue needed. I printed it with 10bottom layers for stability and 50% infill. 

Der M10 Schraubenkopf passt genau rein und muss daher nicht geklebt werden. Ich hab 10 Bodenschichten gedruckt und 50% Infill, damit es auch schön stabil ist und nicht bricht. Eigentlich hab ich mir extra einen Sekundenkleber (Langlaufschuhe Schuhbedarf soll gut sein) bestellt, aber das ist wohl gar nicht mehr nötig. 

Measurement of the nuthead is: hexagon with 16.6mm across. 6.5mm depth.

 

Tagi