Skylight LED strip holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I use the V-Channel Led Aluminum Profile to mount LED strips. These holders allow you to make a rigid structure that can be applied to the roof of an enclosure or underside of a shelf with command strips. Because they are puzzle pieces you can mount as many rows of LED as you like, and cut the channel to any length to fit. Zip ties and glue mean this goes nowhere once attached :)
Here is the V-Channel I used: https://smile.amazon.co.uk/dp/B07RDNMQL6
Print instructions
One of the few things that I can't print well on my Mini because linear advance is pants, these are a tight fit though but print well on a tuned printer. Or dial back the Extrusion multiplier 10%
I used 0.2mm layer height with a stock 0.4mm nozzle on my Mk3 and prusament galaxy silver.