hanging mount for Universal auto rewind spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ceiling or under shelf hanging mount for the Universal auto rewind spool holder. with dust filter.
- Ocena
- 4,8 / 5
- Polubienia
- 83
- Pobrania
- 771
- Wydruki
- 3
- Wyświetlenia
- 7308
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Ceiling or under shelf hanging mount for the Universal auto rewind spool holder. with dust filter. A huge thank you to Vincent Groenhuis for his brilliant spool holder.
https://www.prusaprinters.org/prints/168-universal-auto-rewind-spool-holder-mm
Thanks to modifications mentioned in this post on facebook, my MMU2s works like a dream.
https://www.facebook.com/groups/Prusai3users/permalink/1177033482481131/
Print instructions
Petg filament. for the Ceiling holder and swing arms
PLA filament for the Swing PTFE holders and dust filters
For ease of printing (No Supports) I split the main part into 3 parts and glued them together with epoxy resin. 'Ceiling Base , Ceiling Left, Ceiling right'
The dust filter requires a 15mm cube of foam that is cut in half and filled in each half of the filter. Using a 30mm M3 bolt screw through the hinge and into the swing PTFE holder, don't tighten too much allow the hinge to move freely.
screw in a PC4-M10 Straight Pneumatic Fitting in to the Swing PTFE holder.
The swing PTFE holder is attactched to the Swing Arms with two M4 16mm bolts, leave a gap of about 2mm so the parts move freely. Attach the Swing arms to the ceiling holder with two M4 16mm bolts and M4 lock nuts. see picture details
Thanks to Mordiev there is now a full plate 3mf file and Gcode available