AA Stackable Battery Holders (wall mountable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable AA Battery Holder with wall mounting holes on the back
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 580
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I redesigned the original model to add double height and reduced the text indents for adding the colored text as a color change instead of printing separately and gluing on.
I added the 3mf files with the settings I found best for printing them in PrusaSlicer (not sure if it works in other slicers). If using your own settings or a different slicer, the color change for the cover should start at 0.2 mm (optionally another at 1.0 mm) and the only supports were painted on the overhangs of the AA_Base.
All of mine were printed in PETG, but I'd assume it would work fine in most other filaments too.
Printing Tips:
- For the covers with a color change, it is better to have the first layer be a dark color and then doing a light color for the text. When I tried to do a light color for the first layer, you could see the darker layers behind it where the text was.
- This is a good model to use a 0.6 nozzle if you have one
- You may want to bump up the infill on the base parts
Please post some of your makes and any cool color combinations!