The wave puck screen holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for my new best friend.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 166
- Wydruki
- 0
- Wyświetlenia
- 1110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand for a puck screen of 58.5mm
I am finally able to use my bottomless portafilter without spraying the whole kitchen with coffee.
I cannot get my wife to use WDT tools or even dared to suggest getting a single dose grinder. So our household has a pretty archaic espresso workflow. Which is ok. But with a puck screen I can finally use a bottomless portafilter with success and no mess.
So I had to design a stand. The bottom is open to stimulate airflow for drying and warming the puck screen when it is on top of my espresso machine.
I included a double screen stand which I have not yet printed myself since I have the one screen.
Printing tips. If you machine is calibrated and bridging is normally not an issue than you can print without supports. I printed mine with 2 perimeters at 0.16, 3 bottom, 6 top layers and 23% cubic infill in < 7 grams of rPETG.