Stream Deck MK.1 Faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shake up your boring Stream Deck!
- Ocena
- 4,833 / 5
- Polubienia
- 70
- Pobrania
- 628
- Wydruki
- 7
- Wyświetlenia
- 3289
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Stream Deck MK.2 introduced first-party faceplates for customizing the look of your Stream Deck. Due to the slight size differences they are incompatible with the previous Stream Deck, and existing owners were left out of the fun.
No longer! I have designed templates for both Silhouette plotters, and 3D Printers. The choice is yours, see photos for some examples. Both versions sit on top of the deck, they do not snap-on you can use double-sided tape to secure it. You may want to use 1mm or less as the height for your print, in the photo I used 2mm and it is almost flush with the buttons.
The silhouette file (.studio3) is below however it is suffixed with .txt so that it could be uploaded. I have reached out to Printables looking for another better way to handle these cut files.