Andy Capp playing darts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Andy Capp playing darts
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 388
- Wydruki
- 4
- Wyświetlenia
- 1187
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Andy Capp playing darts
By special request, I've added a version which has been resized to 180mm X 180mm to fit a Prusa Mini+ build plate and provide some different heights for a three colour print.
For the newly added model, the total height has been increased to 2.4mm; with the layer heights changing at 0.8mm and 1.6mm
Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D
I've also made the positioning of the tab so that you can easily remove it during your slicing process, if you'd like to place the artwork on a wall.