1 / 2
Filament spool wall mount for 32mm PVC (plumbing) pipes — zdjęcie 1
1 / 2

Filament spool wall mount for 32mm PVC (plumbing) pipes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall mount for spool with 32mm PVC plumbing pipes.

Ocena
5 / 5
Polubienia
44
Pobrania
272
Wydruki
5
Wyświetlenia
1115
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

A remix from https://www.printables.com/model/81104-filament-spool-wall-mount/ since i already had some commonly available 32mm (outer diameter) PVC pipes used for plumbing. These are cheap and widely available in Europe so the build is easy and cheap to do. Also added an extra tube on the back because i have a space where there is no back wall to support the spools like in the original. Just drilled and screwed into the wall, nothing fancy about that. Pipes are hold in place with a small screw from the bottom into the pipes.

 

Printed in ABS with 30% infill and 4 perimeters/walls. Mine is build 160cm long, 3 mounts used and holds all my spools without bending or breaking. Since object is symmetrical you just have to print in on the side/laying flat on the bed, mine is done without any support without any issues.

Tagi