TX16S watch monitor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something that I could easily remove from my radio when I didn't want it on. I use 12x3 magnets so that i can…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted something that I could easily remove from my radio when I didn't want it on. I use 12x3 magnets so that i can stick it on when i need it there and pop it off when i don't. The piece that goes over the strap loop is in TPU. The part that the watch clips into is PLA. Watch works mounted high or low. This works with the flysight brand and i believe the ethix brand watch, but there are a bunch out there that are the same dimensions. The TPU nub covers the lanyard hole on the radio, so if you fly with a lanyard, this probably isn't for you.
Print Settings
Rafts:
No
Supports:
Yes
Filament:
generic PLA/TPU
Notes:
Need 2 12x3 disc magnets and some crazy glue



Category: R/C Vehicles
