1 / 3
Safety bracket for Kenny Home Brent 60in outdoor light — zdjęcie 1
1 / 3

Safety bracket for Kenny Home Brent 60in outdoor light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

safety bracket to prevent the glass shield from falling

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

If you have the Kenny Home Brent 60in Outdoor Lamp, the glass cover over the lightbulb is somewhat tenuous for staying on (the little indents in the steel that the glass screws onto are pretty loose) So this 2 part bracket goes over the cover to prevent it from loosening. It comes in 2 parts so it can be printed without supports. Just use some small screws (I added some 3D-Gloop to firm it up).

PLA is just fine as this should not be bearing any weight.

as always I have the STEP files uploaded

Tagi