Tripod Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and made this cafe/bistro table a couple of years ago to use as a small apartment dining table.
- Ocena
- 0 / 5
- Polubienia
- 121
- Pobrania
- 267
- Wydruki
- 0
- Wyświetlenia
- 3713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed and made this cafe/bistro table a couple of years ago to use as a small apartment dining table. It's held-up pretty well with the brackets being 3D-printed; even after becoming an outdoor table for about a year. No support printing needed 👍
- Print the 'dowel fit check' part first to make sure all the dowels can fit in snugly by a few inches. If it is too tight or loose, just tweak this part's scale in your slicer to figure out the right size. Adjust all parts to the same scale. *
Top-
1.25" x 30". Thicknesses of 1.25-2" and diameters of 26-30" should work well.
Legs-
2" x 27" dowels cut at 9.25 degrees on the base.
If you can't find at a local lumber yard, there are good ones here:
https://www.amazon.com/gp/product/B00YVXHQ36/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Screws-
I recommend SPAX #8 x 1 in. Philips Square Drive Flat-Head Full Thread Zinc Coated Multi-Material Screw.
-
Mark
@sharedobjects
Print instructions
PETG - .2mm - 50%