1 / 16
FLSUN V400 Enclosure (Cut ABS version)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for V400 cut version printable on the V400 or other small printer
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 309
- Wydruki
- 0
- Wyświetlenia
- 2566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (1)Kolekcje (42)Powiązane
Enclosure for FLSUN V400. Due to proximity with the bed you need to print this design in ABS or similar.
You will need:
- 2 polycarbonate panels 403x787x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend)
- 16 CHC M3x10mm screws
-16 M3 stop nuts
Door at this link :
https://cults3d.com/fr/mod%C3%A8le-3d/divers/flsun-v400-enclosure-cut-version
Printing without support, flat face against the bed.
