Golf - Golf ball Retriever - Head - Replacement Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Golf ball retriever head V1 replacement model for retriever with aluminum tubing that is hollow and 10mm in diameter.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 246
- Wydruki
- 0
- Wyświetlenia
- 2173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is a replacement golf ball retriever head that can be connected to the extendable 10mm diameter aluminum hollow post. This model is useful for pulling balls out of creeks and ponds.
Assembly
This model can be slid onto the end of the aluminum tubing (10mm diameter) and then drill a 2mm hole (use the guide hole on the bottom on the model) to drill through the aluminum and place a 1.75mm piece of filament through the hole and glue with super glue to hold head in place.
Printing Recommendations
Print model using PC-TPE or PETG.
Print using a color different from a golf ball color (so in the water the ball and ball retriever head can be differentiated easily).
Supports required
Support
If you are interested in the Anycubic Photon M5s Pro SLA printer (I use this one) or other Anycubic printers and want to learn more please go to Anycubic Store. For $20 off use this CPMTPFIZJP coupon code at the Anycubic Store.