Logitech M170 - Ratcheted Scroll Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Didn't like how slippery the original scroll wheel had become so I printed a new one. The part comes in 2 pieces.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 234
- Wydruki
- 2
- Wyświetlenia
- 1315
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Didn't like how slippery the original scroll wheel had become so I printed a new one. The part comes in 2 pieces that you can superglue if you want to avoid supports. Alternatively, you can print it whole on one side with supports. Try to use the lowest layer height for a nice resolution, as this is a very small print.
VERY IMPORTANT: Randomize the Z-Seam in your slicer! If the seam is in one spot, it'll have a noticeable bump while rolling.
Be aware that the left part that goes into the scroll mechanism is quite tight. This isn't a trivial print, you might have to sand it down to make it fit. If it feels bumpy, it's probably the left side that's not making good contact!
TinkerCAD link if you want to mess around: https://www.tinkercad.com/things/fsnYZNI2W38
This is a remix from: https://www.thingiverse.com/thing:2804247 https://www.thingiverse.com/thing:2527040
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: PrimaValue PLA Black
Category: Computer