1 / 2
Voron 0.1 Mini After LGX Lite hotend mount for Trianglelab TD6S hotend — zdjęcie 1
1 / 2

Voron 0.1 Mini After LGX Lite hotend mount for Trianglelab TD6S hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Trianglelab TD6S hotend/heatsink mount for the Mini after LGX lite tool head on the voron 0.1

Ocena
0 / 5
Polubienia
4
Pobrania
27
Wydruki
0
Wyświetlenia
592
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Been using the trianglelab heater core since it came out, tried their dragon on my 0.1 build but it didn't last long, there must have been a tolerance issue causing a tiny leak that built up over time.

Their new TD6 hotend has a dragon screw pattern, but is longer than the dragon so I modified the mounting piece so as not to lose any z height, and to keep the nozzle from protruding too far past the cooling ducts.

I didn't want to jump to revo as I have numerous plated, hardened, and different size v6 nozzles, and my other printer uses the same size heatbreak so I had spares on hand.  This keeps all my printers able to use my v6 nozzles for a while longer.

Tagi