2023 Shutter Shades Omicron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick print glasses for 2023 New Year's Eve with upgraded filament hinge mechanism. Multiple sizes.
- Ocena
- 4,762 / 5
- Polubienia
- 83
- Pobrania
- 602
- Wydruki
- 25
- Wyświetlenia
- 2372
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Quick print glasses for New Year's 2023!
Remix Info
Primary new thing here is the filament hinge inspired by a different shutter shade remix. The original openscad design was really good but the snap-fit arms were very fragile. I used blender for some booleans then did manual reinforcement of the hinge portion. Turned out nice.
- 2022-12-01: Added nose bridge.
- 2022-12-09: Added other sizes by request & refined nose.
Source models:
- My 2022 design
- Hinge inspired from thing:4703203 by nutshell
- Customizable
openscadthing:1603773 by drjames - Original shuttershades design thing:28706 by cmcnamara
Printing
Use small segment of 1.75 mm filament for the hinge; heat with soldering iron or similar to solidify. You can use a 2mm drill bit if the holes are a bit snug. They are modeled at 2mm so it just depends on your printer.
PLA is fine if you are gentle but the hinge is stronger with HTPLA/PETG etc. If you have the textured bed you may want to use that so the surface finish is nicer. I do recommend using “don't cross perimeters” setting to reduce PETG stringing (enabled in the 3mf).