Libertadores da America - Trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the trophy for the South American Cup - Libertadores da America
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 803
- Wydruki
- 2
- Wyświetlenia
- 4195
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Design:
This model is fully modular and has been designed with focus on quality, so the whole trophy is printed in several different pieces that need to be assembled.
The center piece was designed as being removable so you can design your own. The ones available for download were designed using the same font used in the team's jersey in those years (just a suggestion). Feel free to request any additional numbers and I will design it when possible.
Base and base covers are optional and recommended in case you want to display more than one trophy as a single piece (attached to each other).
Print from images was done using 0.2mm line height and supports for the main pieces (body & top piece). The small holes you can see in the images are due to the low-quality filament used.
Printing settings:
Layer height: 0.2 mm
Supports: Yes, for the top piece and body
Infill: 15%