AnkerMake M5 spoolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spoolholder for the AnkerMake M5 that only requires 2pcs 608 bearings
- Ocena
- 5 / 5
- Polubienia
- 167
- Pobrania
- 949
- Wydruki
- 19
- Wyświetlenia
- 6014
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATED: Longer versions and right handed thread versions. And for the longer version I also added an end cap to get an cleaner look. Enjoy!
Designed and made an spoolholder for the AnkerMake M5 that only requires that you to take off the original holder and slide a bearing on, then the printed holder and then the second bearing. To get a perfect fit i also printed some washers/spacers in lack of some actual washers.
I printed the parts with PLA in Easy Mode, 0.2 layer and 10% infill and no supports.
NB: The screw has left-handed thread so there is no risk for it to unscrew it self when the spool turns.