Z Correction Live Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like to see the automatic Z correction doing it's job during prints.
- Ocena
- 4,968 / 5
- Polubienia
- 159
- Pobrania
- 877
- Wydruki
- 30
- Wyświetlenia
- 5094
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I really like to see the automatic Z correction doing it's job during prints. To see the tiny movements of the Z correction (Is it working? Is my bed level?), you can just clip this print to an unused part of the leadscrew. No tools or magnets needed. Before that, I used a paperclip but it came loose. Works fine on Prusa Mini with a 8mm leadscrew. Please let me know, if you need other dimension.
You don't need to print something to test the functionality: Just do a Automatic Mesh Bed Leveling and then move the X and Y axis via menu and you'll see the tiny rotations on the leadscrew.
Print instructions
Printed in 0.2mm Prusament PETG Orange in 8 minutes. If your slicer starts with weird tiny spots and loops that won't stick to the bed, try to "Print External Perimiters First", which should print in one single extrusion line and then the tiny parts have something to hold on.
Use 100% infill or better: Increase perimiters until there is no infill or gap.