1 / 3
Anet ET4 and Labists ET4 X-Belt Tensioner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a easy print x-belt tensioner
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (14)Powiązane
This is a modified Version of the X-Belt Tensioner designed from “Misterguru” on thingiverse.
The edge of the base body, which is in contact with the sheet metal, was moved by 20.3mm. In addition, an additional edge has been added to the base body at the insertion of the slider so that it cannot be installed the wrong way.
The slider has been modified, so it slides past the X-axis mounting plate.
You need a lenshead screw M5x25mm and a M5 self locking nut to attach the parts.