Elegoo Neptune 2, 2s, 2d, 3 Filament Guide (low profile)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This wheel helps to smoothly guide the filament directly into the filament sensor.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 119
- Wydruki
- 4
- Wyświetlenia
- 1082
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is used to stop bending, or snaps in the filament. This filament guide helps change the direction from vertical to horizontal and into the filament sensor. You will need a 608 bearing and M3X20mm screws to mount this.
If you have a dual gear extruder I would suggest printing the filament sensor spacer:
https://www.printables.com/model/471527-elegoo-neptune-2-2s-3-filament-sensor-spacer
This is a smaller version of: https://www.printables.com/model/309095-elegoo-neptune-2-2s-2d-3-filament-guide
And if you want to customize your printer go check out:
https://www.printables.com/model/309331-elegoo-neptune-2-2s-2d-3-x-axis-cover
Make sure to go check out all of my other Elegoo Neptune upgrades and accessories.
Print Settings
Printer Brand:
Elegoo
Printer:
Neptune 2
Wheel Settings:
Rafts:
No
Supports:
No
Resolution:
0.1-0.28
Infill:
10%-100%
Filament:
PLA
Wheel Holder Settings:
Rafts:
No
Supports:
Yes
Resolution:
0.1-0.28
Infill:
10%-100%
Filament:
PLA