Scale Sand Ladder 1/10 and 1/35
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sand ladder / Traction board / Sandtrack in both 1/10 and 1/35 scale.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 1583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Sand ladder / Traction board / Sandtrack in both 1/10 and 1/35 scale. For other scales just scale one of these in your slicer. Nice addon for your scaler crawler :) Looks great on your Traxxas TRX-4 TRX4
The 1/35 version has slightly smaller holes because with a .4mm nozzle the dimples wouldn't print if you scale down the 1/10 version to 1/35.
I made this for my 1/35 Orlandoo Hunter Jeep Rubicon OH35A01 and for my Traxxas TRX-4 Defender
The 1:1 version would be 150x44cm.
If you print this, a 'make' would be appreciated :)
Print Settings
Supports:
No
Notes:
Use small layer height for 1/35 version! It's only 0.57mm high :)
The 1/10 version is 2mm high so 0.10mm layers should be fine.
Category: R/C Vehicles