closed inlay for battery beer crates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
closed inlay for famous beer crates in 2 sizes. Usefull for storing tiny things that otherwise fell through.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 75
- Wydruki
- 2
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
closed inlay for famous battery beer crates. Usefull for storing tiny things that otherwise fell through. The inlay is for the empty crate… You can print it in 2 sizes. A lower one if you just want to cover the bottom or a taller one to cover the side holes too.
It prints in vase mode to save plastic and time.
print instructions
- spiral/vase mode
- 0.2mm layer height
- 0.7mm line width
- 4 solid bottom layers
see my other beer crate mods too: https://www.printables.com/social/113164-antimaterie/collections/403088
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.