Vesa mount 100 x 100 (minor swivel adjustment)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vesa mount for PC Monitor that allows you to correct the position of your monitor if the wall part isn't mounted level
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first project I made to print on my 3D printer that I actually will use.
Because of the round connection shape, it is possible to swivel your monitor some degrees to get it into a 100% horizontal position even if the wall part isn't mounted completely level to your wall.
Wall part needs to be rotated before printing (Flat part on your printbed)
Print Settings
Printer:
BIQU B1
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
40%
Filament:
Black
Notes:
To make the part strong enough I used these settings in CURA:
* 40% infill * Wall lines, top and bottom layers: 6 * support
Maybe these are a bit of an 'overkill' but I wanted to be sure that the parts could handle the weight of my screen (27")a
And it does with no problem!
Category: Other