Interlocking Christmas Tree with Ornament (update: light version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Christmas Tree. You decide how big it should be. With or without light.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 982
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
A nice little christmas tree for decoration.
If you want to build the light version, you can use https://www.amazon.de/gp/product/B0919SQG7C/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 but there are others like that. They have nearly all the same sice.
You can choose how many segments your tree should have. Simply plug all parts together.
In the Cup fits lights with 87mm wide and 33mm hight. Print it trasparent or white.
There are a max of 8 segment plus the base. In total the tree is 25cm tall and 18cm wide.
The print file “Branch Wreath 1” is the smallest and on top. So ich you wanna make it half tall, take the file 1-4 for example.
In Prusaslicer i put Fuzzy Skin on the tree trunk with the perimeter 0,5/0,9. You dont need to but it looks much better.
I printed the Ornament with a 0,4 Nozzle and 0,16 layer. The branch wreath with a 0,6 nozzle and 0,3 layer for more speed. But you can print all parts with a 0,4.
There is not alot of infill but 20-25% should be ok.
Merry Christmas