Atari 2600 Console Card Wallet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Atari Console made into a card wallet
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 1045
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution
This is a merger of 2 models: Atari 2600 Console - Keychain by Demolition88 and a minimalist wallet by 3dWorkBench. Attributions are printed into the wallet.
Instructions is mostly identical to my NES Cartridge card wallet. https://www.printables.com/model/315407-nes-cartridge-card-wallet
MAKE SURE TO NOT GLUE THE ARM PORTION OF THE WALLET.
The card cavity has a built-in supports for filament printing.
Still need to support the small overhang on the front part of the wallet.
In the files:
- Wallet in 2 pieces - 1 print bed for filament printing (0.2mm layer height)
- Wallet/Bottom portion only with and without the built-in support
- Top portion only
- Wallet in 1 piece for UV-resin printers (no actual experience with those but this is my best guess what would work for those printers) - may not work as intended the arms that supposed to flex might be fused with the top show part… might want to add a gap to allow for arms to flex.
If you have any issues drop me a message and also post a make.
Fun addition… I'm printing a joystick to go with this… scaled it down to about 25 mm in length and width… to roughly the right scale - https://www.thingiverse.com/thing:2640107