Parametric Backlit House Address Numbers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
House Address Numbers designed to allow you to put LEDs behind them to light them up at night.
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 354
- Wydruki
- 0
- Wyświetlenia
- 3137
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I painted the trim on my house only to find that black numbers on a dark trim is hard to read… So rather than do the easy and cheap thing and just buy white numbers, I decided to build my own.
I designed these to be attached to a frame of whatever material you want (I used a few pieces of scrap wood), and put a WS2812b light strip on the inside of the frame, controlled by a ESP32 with WLED.
You will need to print the “base-” pieces in a dark opaque material of your choosing. Then print the “diffuser-” pieces in a light translucent material.
The scad file is included to customize your fonts and sizes. Pick the preview part to get an idea how everything will look when finished, when you have it all figured out, pick each part individually and save out each part for printing.