Printed knife handle for Morakniv no. 2000 blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of knife scales for blade no. 2000 from Morakniv
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 271
- Wydruki
- 0
- Wyświetlenia
- 2301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Who doesn't want a knife with a 3D Printed handle?
This set of scales is made for the knife blade nr.2000 from Morakniv:
https://morakniv.se/produkt/knivblad-nr-2000-s/
My knife scales are printed in Markforged Onyx (carbon fiber reinforced nylon) with continuous Kevlar reinforcement, the blade is glued in with some 5-minute epoxy, and the scales are fastened with a set of small brass Chicago screws (approximately 4mm diameter post and 6mm head)
As it turns out that some users that wanted to make this had a hard time finding the correct chicago screws, I've uploaded two updated versions that fits more common metric chicago screws, specifically:
Recommended Screws:
Chicago screws with 5mm barrel diameter, 8mm head diameter, 12-14mm length. These are usually M4 thread.
For example: https://www.amazon.se/dp/B0D127GVBH/
Alternate Screws:
Chicago screws with 4mm barrel diameter, 10mm head diameter, 12-14mm length. These are usually M3 thread.
For example: https://www.amazon.se/dp/B0F2G2GTMD/