Solder paste & flux Dispenser Crossover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Crossover from the Original and there Remixes.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 112
- Wydruki
- 4
- Wyświetlenia
- 954
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Crossover from the Original and there Remixes. I Like the Design but the Original Files are not ready to use.
What i used:
-The Nut from the Original (Perinski)
-The new threaded rod with more space from aethenelle's Remix
-The remake Bodypart from Xek
What I changed:
The new Bodypart has stronger "ears" BUT if you print it in one Part as it recommended by Xek you loosing strangeness because its print in the wrong direction. I tried but it brokes!
So I split it in two half (Like the original and the other remixes) to glue it together, now it need less support AND its stronger and the "ears" cant break so easily anymore.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0,2
Infill:
100%
Filament: Zaper PLA Black and Thermo Blue/Natural
Notes:
Body:
Support Yes
Infill 100% (for stangeness)
Nut:
Support No
Infill 100%
Rod:
I used Raft for better bed adhesion (but its not needed)
Support No
Infill 100%