1 / 6
Extruder Gyroscope, Print in place with press fit magnets. — zdjęcie 1
1 / 6

Extruder Gyroscope, Print in place with press fit magnets.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets.

Ocena
4,971 / 5
Polubienia
336
Pobrania
1360
Wydruki
33
Wyświetlenia
12 889
Oceny
34

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN!

50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1

The Provided G code uses a filament swap. I have provided the Blender file and the 3mf Prusa slicer file and .stl file.

EDIT: I suggest using a dab of superglue to affix the magnets as the heat from the motor will eventually move through the metal and soften the PLA and cause the gyroscope to fall off.

Print instructions

My Gcode file has a filament swap for a color stripe. I used PLA Filamentum Neon Green and Vertigo Grey. Print in place freely spun after print finished. I hand spun it quickly for a while to get it to freely rotate and move better.

EDIT: I suggest using a dab of superglue to affix the magnets as the heat from the motor will eventually move through the metal and soften the PLA and cause the gyroscope to fall off.

Tagi