1 / 5
1 inch Tape Measure Yagi Coupler (3/4 inch PVC Boom) — zdjęcie 1
1 / 5

1 inch Tape Measure Yagi Coupler (3/4 inch PVC Boom)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This coupler is an easily adjustable mounting device for 1" tape measure yagi elements on a 3/4" (ID) PVC pipe boom.

Ocena
0 / 5
Polubienia
24
Pobrania
103
Wydruki
0
Wyświetlenia
2083
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This coupler is an easily adjustable mounting device for 1" tape measure yagi elements on a 3/4" (ID) PVC pipe boom. The yagi elements secure with 3/4" to 1 3/4" hose clamps. The hose clamps act as friction locks for the yagi elements.

This design is jointly owned by myself and Robert Meade Thingiverse Link here

Print instructions

Supports are required for the entire model. I printed with PETG but PLA will also work (although soldering will be riskier). Layer height does not matter. I printed with 30% infill for the print

Tagi