Forstner Bit Holder for 7-piece Freud Set (1/4" - 1")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After using a few strips of gaf tape to hold some forstner bits in the wimpy case they came in, I finally got around…
- Ocena
- 4,75 / 5
- Polubienia
- 42
- Pobrania
- 230
- Wydruki
- 3
- Wyświetlenia
- 1187
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
After using a few strips of gaf tape to hold some forstner bits in the wimpy case they came in, I finally got around to designing a case to hold them.
Also, because I really didn't want to have any more heart-attacks of having the bits roll-around on my workbench and nearly crash on the concrete floor, I designed the case as a holder as well. Removing the lid gives access to each bit.
My first time doing threads in the way. The lid attaches with two turns, which isn't too bad. There are a couple of refinements I would do next time, like having some big of "seating" before beginning the threads. But alas, that will never happen as this model has reached the 'good enough' level.
There are indents for each drill size so when placing them in it's clear to see what bit is for which hole.
Print in something hard like PLA