80cm 1010 Security Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This robot I found in a small comic series published on Deviant Art ...
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
More large robot prints are comming up :) …. This one is based on an image and comic series I discovered on Deviant Art. The original 3D model was designed by an artist on Fiverr for me.
The robot design is from the artist “ProdigyDuck” on Deviant Art
https://www.deviantart.com/prodigyduck
Here you have an example of one of the reference pictures …
Since it has not been designed by me (I am not skilled performing such tasks), full credit goes to the artists on Deviant Art and Fiverr.
The 3D model of this robot was designed by “dasunmadushanka”. Here is the link to his Fiverr account: https://www.fiverr.com/dasunmadushanka
To mount the parts there are holes included which fit standard 40mm long, 8mm or 10mm in diameter wooden bolts (very rarely also 30mm x 6mm if not enough room for larger ones).
This one was quite difficult to cut due to the overlapping regions, but I think at the end I managed it. I printed it already and it worked out fine.
I printed the files as prepared, removed the supports and glued the parts together with super glue for the surfaces and mounting glue for the wooden bolts.
For Printing a usually chooese quite strong settings since I made the experience that printing such larg figures make thin walls and low infills very fragile. But all 3mf files are included as well. So change the settings to your preferences to make the print faster & cheaper or even tougher :) …
Also included is the uncut STL file … so you can scale the robot to your needs.
Enjoy